flowmeter

SWV01-0610 Series Micro Flow Meter

SWV01series general-purpose food grade flow meter working principle is inner impeller rotated by the impact of fluid flow, the speed of impeller rotates to reflect flow rate. This series is cost-effective. Which widely used in small appliances such as coffee machines and beverage machines, usually installed between tank container on suction side and vibration pump.Since it is a closed system, water outlet side can be assembled in four different directions.

  • Model: SWV01-0610

Introduction:

SWV01 series general-purpose food grade flow meter working principle is inner impeller rotated by the impact of fluid flow, the speed of impeller rotates to reflect flow rate. This series is cost-effective. Which widely used in small appliances such as coffee machines and beverage machines, usually installed between tank container on suction side and vibration pump.Since it is a closed system, water outlet side can be assembled in four different directions.


Feature:

- High precision

- Reproducible

- Yuan zero drift, good anti-interference ability

- Wide range

- Compact structure


Applications:

- Coffee machine

- Medical disinfection machine

- Beverage machine


Electric parameter:

MetInfo enterprise content manager system | MetInfo CMS



Performance parameter:

MetInfo enterprise content manager system | MetInfo CMS


Material parameter:

MetInfo enterprise content manager system | MetInfo CMS

Dimension:

MetInfo enterprise content manager system | MetInfo CMS


MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS


Wiring method and output characteristics:

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS



Instructions for use:

- In order to prevent particles and debris from entering the sensor, a filter must be installed at the

 sensor inlet.

- The micro flow sensor should be installed indoor or inside the equipment. Do not expose it to

 outdoor environment or humid and high temperature for a long time.

- Micro flow sensors should be installed away from vibration and shaking environments and

 applications to avoid affecting the measurement accuracy of the sensor.

- When a magnetic material or a material which generates a magnetic force to the sensor close to

 the sensor, characteristics will be changed.