Angle sensor

The SVM30 series intelligent vibration tilt sensor

The SVM30 series intelligent vibration tilt sensor adopts low noise, low drift and low power consumption three-axis MEMS acceleration, which can achieve high frequency and low noise performance, providing high resolution vibration measurement, and can find faults in monitoring applications earlier.

  • Model:

Introduction:

The SVM30 series intelligent vibration tilt sensor adopts low noise, low drift and low power consumption three-axis MEMS acceleration, which can achieve high frequency and low noise performance, providing high resolution vibration measurement, and can find faults in monitoring applications earlier. This product not only performs well, but also consumes low. In addition, the sensor provides accurate and reliable tilt measurements in high shocks and vibrations environments without saturating the sensor. This is important in tilt measurements for heavy equipment or UAV airborne platforms. It also provides high-quality datas for Internet of Things (IoT), supporting intelligent detection from the edge of the network.

Digital signal output is adopted , and the programmable measurement range is : ±10g、±20g and ±40g which Leading the sensor industry with higher flexibility,80μg/√Hz as the lowest noise density, 0g disordered drift in working temperature and 0.75 mg/℃ is the ensured ceiling. Only needs a few adjustments to get a precision test. Moreover, it also has ±0.05° tilt measurement accuracy, built-in temperature sensor, small size and low power consumption advantages.



Features:

- Low noise, low drift, low power consumption

- High shock and vibration

- programmable measurement range is ±10g±20g and ±40g

- built-in temperature sensor with compact size

- equipped with magnetic installation parts

Applications:


- Inertia measurement

- Sailing direction monitoring

- Industrial automation

- Perceptual ability of Autonomous vehicle inspecting

- System stability inspecting

- Structure status monitoring

- Seismic imaging monitoring

- Tilt sensing

- the robot monitoring

- Working status monitoring

- spot site instruments and meters monitoring

Dimensions:

MetInfo enterprise content manager system | MetInfo CMS

Parameters:


working voltage

DC 4.5~36V

working current

<15mA

measuring range

±10g,±20g,±40g,

numbers of axis

3

tilt precision

±0.05°

tilt angle range

±90°  

sensitivity

±10g,80mV/g | ±20g,40mV/g | ±40g,20mV/g

temperature drift

0mg ~ 0.75 mg /

noise density

80 μg /√Hz    

response frequency

0.01~1000Hz    

nonlinear

0.10%

temperature accuracy

±0.3

communication mode

RS485RS232CAN

working temperature

-40 ~ 125

Level of protection

IP65-IP68optional  

weight

55g (only the detection head)

connecting cable

four core wires, with a standard length   1.5m, terminal outgoing

installation

installed screw thread is M5x0.5 x10

housing material

frosting oxidative aluminum alloy housing

Output characteristics:

MetInfo enterprise content manager system | MetInfo CMS


Wiring method:

RS485

Cable color

Meaning

Red

VCC    9~36V

Yellow

A

Green

B

Black

GND

CAN   connecting method

Cable color

Meaning

Red  

VCC   9~36V

Yellow

CANH

Green

CANL

Black

GND