flowmeter

SWV01-1050 Micro Flow Mete

Introduction:SWV01series general-purpose food grade flow meter working principle is inner impeller rotated by the impact of fluid flow, thespeed of impeller rotates to reflect flow rate.This series is

  • Model: SWV01-1050

Introduction:

SWV01series general-purpose food grade flow meter working principle is inner impeller rotated by the impact of fluid flow, the

speed of impeller rotates to reflect flow rate.This series is cost-effective. Which widely used in small appliances such as coffee machines and beverage machines, usually installed between tank container on suction side and vibration pump.Since it is a closed system, water outlet side can be assembled in four different directions.


Features:

- High precision

- Reproducible

- Yuan zero drift, good anti- interference ability

- Wide range

- Compact structure


Applications:

- Mechanical equipment

- Disinfector

- Beverage machine


Electric parameter:


MetInfo enterprise content manager system | MetInfo CMS



Performance parameter:


MetInfo enterprise content manager system | MetInfo CMS


Flow range corresponding to single pulse flow:


MetInfo enterprise content manager system | MetInfo CMS

Dimensions:


MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMSMetInfo enterprise content manager system | MetInfo CMS



MetInfo enterprise content manager system | MetInfo CMS


Wiring method and output characteristics:


MetInfo enterprise content manager system | MetInfo CMS



Instructions for use:

- If the test liquid is not pure, in order to avoid blockage caused by particles and debris entering the

sensor, it is recommended to install a filter at the sensor inlet.

- Recommendation: Install a micro flow sensor inside the device or indoor. Do not expose it to outdoor

environments or harsh environments such as high temperatures.

- Micro flow sensors should be installed away from vibration and shaking environments and

applications to avoid affecting the measurement accuracy of the sensor.

- Recommendation: The micro - flow sensor is fixed in a non-conductive magnet.

- When a strong magnetic field is close to the sensor, its characteristics may change.